Bose PowerSpace P4300A 1200 Watt 8 Ohm or 70 Volt 4-Channel Commercial Amplifier. Condition: AN OPEN BOX ITEM. Ideal for zone-expansion applications, Bose PowerSpace amplifiers enhance any premium commercial sound installation with clean, reliable power - and digital connectivity.
A Bose AmpLink input allows for multiple channels of uncompressed, low-latency digital audio from Bose DSPs via a single Cat 5 cable. The PowerSpace P4300A provides 300 watts per channel and features versatile outputs that give you the flexibility to deliver full channel power to either low- or high-impedance loads - without bridging - and even send double power to a single zone. For premium commercial applications, Bose PowerSpace amplifiers provide the power and performance to get the job done - pure and simple.
300 watts per channel and works seamlessly with Bose loudspeakers, DSPs, and controls to create complete commercial sound systems. Bose AmpLink input for simplified multichannel digital audio connection to compatible DSPs, reducing terminations and related points of failure. Load-independent outputs deliver full channel power to either low-impedance loads (4-8 O) or high-impedance (70/100V) loads without bridging.
I-Share outputs delivers 2x power level into low-impedance (2-4 O) or high-impedance (70/100V) loads by combining the current of both channels. Amplifier Power: 4x 300 W THD+N. I-Share Mode Power: 2x 600 W (2-4 O, 70/100V) (Each channel pair can be I-Shared). Gain (Low-Z mode): 32 dB. Gain (70V mode): 35 dB.Gain (100V mode): 38 dB. Dynamic Range: = 100 dBA (at rated power). Maximum Input Level: 22 dBu (at 14 dBu sensitivity setting).
Sensitivity: -10 dBV / 4dBu / 14 dBu. Power LED: Solid white: Power is on. Blinking white: Unit is in auto standby mode.
Solid red: Power supply fault. Input Signal LED: Green: Signal present.Amber: Input is near clipping. Output Limit LED: Amber: Amplifier limiting an output. Solid red: Amplifier or thermal fault. Controls, Front Panel: Power On/Off. Controls, Rear Panel: Amplifier mode DIP switches, input sensitivity switch, input select dial, mute, output attenuators. Mains Voltage: 100 VAC - 240 VAC (±10%, 50/60 Hz). AC Power Consumption: 120 VAC. 120 VAC: 25 W (Auto standby), 570 W (Max). 230 VAC: 25 W (Auto standby), 570 W (Max). Mains Connector: Standard IEC (C14).
Protections: Vpeak/Vrms limiters, high temperature, output short, extra high frequency (EHF), excessively low or high AC line voltage. Operational Temperature Range: 0 °C to 40 °C.
Storage Temperature Range: -40 °C to 70 °C. Dimensions (H × W × D): 44 × 483 × 420 mm (1.7 × 19.0 × 16.5 in). Net Weight: 6.6 kg (14.6 lb). Cooling System: Microprocessor-controlled variable-speed fans, front-to-back air flow. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options.We will send you a. To replace the item for a brand new one.
All replacements and exchanges are free. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Amplifiers".
The seller is "audiosavings" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Uruguay.